CDX(L) SINGLE IMPELLER CENTRIFUGAL PUMPS

Capacity : up to 15M³/Hr     Total Head : up to 71.5M     Motor : IE 3

Application :

Domestic pressure boosting, Small-scale garden irrigation, Washing, Treating water, Cooling towers, Pumping clean water in general.

Material of Construction :

• SS 304 Version – Pump Casing, Impeller, Shaft, Diffuser and Casing cover in SS 304.
• SS 304 Version – Pump Casing, Impeller, Shaft, Diffuser and Casing cover in SS 304.

2CDX(L) DUAL IMPELLER CENTRIFUGAL PUMPS

Capacity : up to 15M³/Hr     Total Head : up to 71.5M     Motor : IE 3

Application :

Domestic pressure boosting, Small-scale garden irrigation, Washing, Treating water, Cooling towers, Pumping clean water in general.

Material of Construction :

• SS 304 Version – Pump Casing, Impeller, Shaft, Diffuser and Casing cover in SS 304.
• SS 304 Version – Pump Casing, Impeller, Shaft, Diffuser and Casing cover in SS 304.

DWO OPEN IMPELLER CENTRIFUGAL PUMPS

Capacity : up to 66M³/Hr     Total Head : up to 17.5M
Motor : IE 3

Application :

Washing vegetables, meat, fish, mollusks, Industrial washing plants at cycle end, Dishwashers, glass washers, cup washers for communities, Painting booths, Washing and surface finishing of metal pieces, boxes, washing bottles, vases, glass containers, crates, baskets, Pumping, evacuation, transfer of liquids.

Material of Construction :

• Pump Casing, Casing Cover, Impeller and Shaft in SS 304

3D SERIES MONOBLOCK CENTRIFUGAL PUMPS

Capacity : up to 138M³/Hr     Total Head : up to 71M
Motor : IE 3

Application :

Handling of water and clean, chemically non-aggressive liquids, Water supply. Pressurisation. Washing and industrial plants, Water circulation in climate control systems, Irrigation and agriculture.

Material of Construction :

Impeller in : SS 304 for Series 3D 32, 40, 50, SS 316 for Series 3D 65 Shaft in SS 304, Cast Iron Pump Body
Special Version : 3DPF Version available up on request

3M SERIES CENTRIFUGAL PUMPS

Capacity : up to 240M³/Hr     Total Head : up to 93.5M
Motor : IE 3

Application :

Water supply to civil, agricultural and industrial plants, Pressure boosting, Fire-fighting, heating and air conditioning systems, Pumping industrial liquids, Irrigation, Refrigeration towers, Swimming pools, Washing plants.

Material of Construction :

Pump Casing and Casing Cover in SS 304, SS 316, SS 316L Impeller in SS 304, SS 316, SS 316L
Special Version : 3Z Series - Electro pump inclusive of rotary bracket and body without supporting foot.

EVMS SERIES VERTICAL MULTISTAGE PUMPS

Capacity : up to 84M³/Hr
Total Head : up to 307

Application :

Water Treatment, Boiler Feeding, Wash and Clean, Chilling, Machine Tooling, Pressure Boosting, Food & Beverage - Food washing systems, Bottle wash systems, Pharmaceutical Industries, Marine Applications, Sprinkler Systems, Fire Fighting Systems - Jockey Pump, Heat Exchangers - Fan Heaters, Air Conditioning Systems, Heating Systems, District Heating, Irrigation, Agriculture - Sprinkler Irrigation, Drip Irrigation.

LPS/LPC/LPCD IN-LINE CENTRIFUGAL PUMPS

LPS Capacity : up to 24M³/Hr     Total Head : up to 19.8M
LPC/LPCD Capacity : up to 1100M³/Hr     Total Head : up to 90M

Application :

Civil and Industrial Heating Systems, Domestic Hot Water Handling, Cooling / Heating and Air Conditioning Systems, both Civil and Industrial, Fluid Handling for Circulation, Hot Water and Low Pressure Fluid Handling in general, Pumping, evacuation, transfer of liquids.

Material of Construction :

• Casing, Impeller, Shaft and Gasket disk in SS 304.
• Casing, Impeller and Gasket disk in Cast Iron, Shaft in SS 304.

MATRIX HORIZONTAL MULTISTAGE
PUMPS

Capacity : up to 27M³/Hr
Total Head : up to 97M
Motor : IE 3

Application :

Industrial Washing, Pressure Boosting Units, Industrial Plants, Distribution and Treatment of Water, Heating and Air Conditioning, Cooling and Chiller, Irrigation, Recovery of Rain Water.

Material of Construction :

Pump Casing, Impellers, Intermediate Stages, Seal Housing Disc and Shaft in SS 304

D SERIES SUBMERSIBLE PUMPS

Capacity : up to 1800M³/Hr     Total Head : up to 50M     Motor : IE 3

Application :

Purification Tank Drainage, Rain and Spring Water Drainage, Industrial Waste Water Drainage, Septic Effluent, Miscellaneous Drainage, Sewage, Waste Water, Emptying Seepage water, Moving Sewage, Emptying Cesspits.

Material of Construction :

• DS – Casing & Impeller Cast Iron, Shaft SS 304.
• DVS – Casing & Impeller Cast Iron, Shaft SS 304.
• DL - DL/WC – Casing, Impeller, Shaft Cover Cast Iron, Shaft SS 304.
• DML – DMLV - Casing & Impeller Cast Iron, Shaft SS 304.

DW – DW VOX SUBMERSIBLE PUMP

Capacity : up to 54M³/Hr     Total Head : up to 20M
Motor : IE 3

Application :

Evacuation of civil and industrial waste water, Drying wells and excavations, Draining underground areas, Handling fluids containing suspended solids, Draining infiltration water, Handling foul waste water, Draining cesspits.

Material of Construction :

• Casing, Impeller, Motor cover, Gasket disk and Motor casing, Shaft in SS 304.
Special Version : VOX version (VORTEX impeller)

RIGHT SUBMERSIBLE PUMPS FOR LOADED WATER

Capacity : up to 18M³/Hr
Total Head : up to 19.5M
Motor : IE 3

Application :

Handling water containing suspended solids / filaments, Draining infiltration water, Handling drainage water, Draining cesspits and draining into the sewers.

Material of Construction :

Casing, Impeller, Motor Cover, Gasket Disk, Motor Casing and Shaft in SS 304.

IDROGO CENTRIFUGAL BORE HOLE
PUMPS

Capacity : up to 7.2M³/Hr
Total Head : up to 75.7M
Motor : IE 3

Application :

Handling clear water from wells, Cisterns and first collection tanks, Pressurizing domestic systems, Small irrigation systems, Washing vehicles, Increasing pressure in general.

Material of Construction :

Casing, Impeller & Shaft in SS 304.

HORIZONTAL PRESSURE BOOSTING SYSTEM

Applications 2GP pressurization units :

• Water supply to building service distribution systems.
• Generic industrial water supply.
• Irrigation for gardens, parks and sports facilities.

Pump Materials : (Cast iron pump body)

• AISI 304 seal disk for AGA 0.60-0.75-1.00, cast iron integrated into motor mount for the rest of the range.
• AISI 303 steel shaft (part coming into contact with liquid).
• Ceramic/carbon fibre/NBR mechanical seal.
• Ejector and diffuser in PPE + glass fibre reinforced PS.
• PPE+glass fibre reinforced PPS impeller for AGA 0.60-0.75-1.00, brass for the rest of the range.

CSA/CAN SERIES SPLIT CASING PUMP

Capacity : up to 1800M³/Hr     Total Head : up to 150M
Motor : IE 3 - Horizontal split casing pump

Application :

Water supply, Hot and Cold water circulation, Air conditioning, Irrigation, Industrial use.

Material of Construction :

• Casing : Cast iron / Ductile cast iron (FCD).
• Impeller : Bronze (except 250 X 150 CNKA & 300 x 200 CNKA) SCS 13 for 250 x 150 CNKA, 300 X 200 CNKA.
• Shaft : SUS 316 / SUS 403 / SUS 304.
• Shaft sleeve : Bronze / Bronze.

FSA / FSC / GS / FSSC SERIES END SUCTION VOLUTE PUMPS

Capacity : up to 1320M³/Hr
Total Head : up to 15OM
Motor : IE 3

Application :

Water supply, Chemical industry, Petroleum Refineries, The Petrochemical industry & Other industries.

Material of Construction :

CI/SS 316/Duplex steel capacity upto130 M3/Hr Total head upto 150M.